How To Set Each Function; Setting On The Control Panel - Brother HL-1050 Technical Reference Manual

2.2.

How to set each function

2.2.1.

Setting on the control panel

PRINT CARBON
MENU MENU
* (Only HL-5270DN/5280DW/5380DN Printer)
When CARBON COPY=OFF is set, other carbon menu is not indicated.
The setting indication of each copy is shown on the control panel for the number of copies which is
set in the CARBON COPIES menu to set the paper tray and macro.
The setting of each copy is saved even if it is not indicated.
When implementing FACTORY RESET, all settings are initialized.
=OFF/ON/AUTO
CARBON COPY
/ PARALLEL
=1 - 8
COPIES
=AUTO/REMAINING
COPY 1 TRAY
=OFF
COPY 1 MACRO
(Same with COPY 1)
COPY 2 TRAY
(Same with COPY 1)
COPY 2 MACRO
(Same with COPY 1)
COPY 3 TRAY
(Same with COPY 1)
COPY 3 MACRO
(Same with COPY 1)
COPY 4 TRAY
(Same with COPY 1)
COPY 4 MACRO
(Same with COPY 1)
COPY 5 TRAY
(Same with COPY 1)
COPY 5 MACRO
(Same with COPY 1)
COPY 6 TRAY
(Same with COPY 1)
COPY 6 MACRO
(Same with COPY 1)
COPY 7 TRAY
(Same with COPY 1)
COPY 7 MACRO
(Same with COPY 1)
COPY 8 TRAY
(Same with COPY 1)
COPY 8 MACRO
CARBON COPY FUNCTION- 5
Sets the carbon copy mode.
Sets the number of copies.
Selects the paper tray.
MPTRAY
TRAY 1
TRAY 2
TRAY 3 *
Sets the additional macro.
(ID number) (Note) When no macro is
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
(Same with COPY 1)
8/2/2010
set, 'NO MACRO
DATA' is indicated,
and the display
returned.