User-Defined Pattern Control; Set Pattern Type - Brother HL-1050 Technical Reference Manual

8/2/2010

6.1.6. User-defined pattern control

Esc*c#Q
# = 0 deletes all (temporary and permanent) user-defined patterns from the printer memory.
# = 1 deletes all temporary user-defined patterns from the printer memory.
# = 2 deletes the pattern whose ID number was specified most recently.
# = 4 saves the user-defined pattern as a temporary pattern whose ID number was specified most recently.
# = 5 saves the user-defined pattern as a permanent pattern whose ID number was specified most recently.

6.1.7. Set pattern type

Esc*v#T
This command selects the fill pattern (black, white, gray scale or cross-hatch pattern) for use with
subsequent graphics operations.
# is in the range 0 to 4 or 130.
# = 0 selects solid black as the fill pattern.
# = 1 selects white as the fill pattern (all source images will be completely white).
# = 2 selects one of eight gray scales. Specify the gray scale you require as a percentage (0-100%) with the
Set Area Fill Identity command.
# = 3 selects the cross-hatch pattern you choose with the Set Area Fill Identity.
# = 4 selects the user-defined pattern
# = 130 selects one of the 64 gray scales. You can specify the gray scale you require as a percentage (0-
100%) with the Set Area Fill Identity command. This feature is unique to these HL-Series printers.
(27)(42)(99)#(81)
(27)(42)(118)#(84)
0%
#=130
3 - 10%
#=2
1- 2%
#=0
#=1
#=2
#=3
#=130
CHAPTER 2 "PCL" - 78
<1Bh><2Ah><63h>#<51h>
<1Bh><2Ah><76h>#<54h>
56-80%
21-55%
11 - 20 % 36-55%
81-99%
100%