Eyelet - Brother NV4500D Operation Manual

Eyelet

Use this stitch for making belt holes and other similar applications.
Stitch Stitch name

Eyelet

Star eyelet
a a
a a
Select or
b b b b
Use in either the stitch width
display or the stitch length display to
choose the size of the eyelet.
a
a Large 7 mm (approx. 1/4 inch)
b Medium 6 mm (approx. 15/64 inch)
c Small 5 mm (approx. 3/16 inch)
Note
Only one size is available for
c c
c c
Attach monogramming foot "N", then turn
the handwheel to check the needle drop
position.
a
a Needle drop position
Presser
Applications
foot
For making eyelets, holes on
belts, etc.
For making star-shaped eyelets
on holes.
.
b c
(Actual size)
.
Stitch width
[mm (inch.)]
Auto. Manual
7.0 7.0 6.0 5.0
(1/4) (1/4 15/64 3/16)
— —
d d d d
Lower the presser foot and start sewing.
→ When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
Note
If the stitch pattern comes out poorly, make
adjustments (see page 121).
e e e e
Use the eyelet punch to make a hole in the
center of the stitching.
SEWING THE STITCHES
Stitch length
Twin
[mm (inch.)]
needle
Auto. Manual
7.0 7.0 6.0 5.0
NO
(1/4) (1/4 15/64 3/16)
— — NO
3
109