Using A Frame Pattern To Make An Appliqué (2) - Brother NV4500D Operation Manual

Using a Frame Pattern to Make
an Appliqué (2)
This is a second method to make appliqué using
embroidery patterns. You do not have to change
the fabric in the embroidery frame using this
method. Embroider one pattern with a straight
stitch and one pattern with a satin stitch.
a a
a a
Select a straight stitch frame pattern, and
embroider the pattern onto the base fabric.
b b b b
Place the appliqué fabric over the pattern
embroidered in step
* Be sure that the appliqué fabric completely covers
the seam.
c c c c
Embroider the same pattern on the appliqué
fabric.
a a a a
.
EMBROIDERY APPLICATIONS
d d d d
Remove the embroidery frame from the
embroidery unit, and cut around the
outside of the stitches.
Note
• Do not remove the fabric from the embroi-
dery frame to cut it. Also, do not pull strongly
on the fabric. Otherwise, the fabric may
loosen in the frame.
e e
e e
Select the satin stitch frame pattern of the
same shape as the appliqué.
Note
• Do not change the size or position of the
pattern.
f f f f
Reattach the embroidery frame to the
embroidery unit, and embroider the satin
stitch pattern to create an appliqué.
5
195