Appliqué; I If The Needle Does Not Catch The Fold; I If The Needle Catches Too Much Of The Fold - Brother NV4500D Operation Manual

SEWING THE STITCHES
f f f f
Remove the basting stitches and turn the
fabric over.
a
a Wrong side of fabric
b Right side of fabric
Memo
Blind hem stitches cannot be sewn if the left
needle drop point does not catch the fold. If
the needle catches too much of the fold, the
fabric cannot be unfolded and the seam
appearing on the right side of the fabric will be
very large, leaving an unattractive finish. If you
experience either of these cases, follow the
instructions below to solve the problem.
I If the Needle does not Catch the
Fold
Adjust the width so that the needle slightly catches
the fold by pressing
I If the Needle Catches Too Much of
the Fold
Adjust the width so that the needle slightly catches
the fold by pressing
90
b
in the width display.
in the width display.
Appliqué
a a a a
Use a temporary spray adhesive, fabric glue
or a basting stitch to attach the appliqué to
the fabric.
* This will keep the fabric from moving during
sewing.
a
b
a Appliqué
b Fabric glue
b b
b b
Select or
* Adjust the stitch length and width to correspond to
the appliqué shape, size, and quality of material (see
page 49).
Memo
For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of this
manual.
c c
c c
Attach presser foot "J". Check that the
needle drops slightly off the edge of the
appliqué, then start sewing.
a Appliqué material
a Needle drop position
.
a