Brother NV4500D Operation Manual page 45

j j j j
Pull the thread up along the left side of the
thread path guide to the top left corner of
the threading path cover.
a Top left corner
b Threading path cover
k k k k
Pull the thread down to the needle bar
along the left side of the thread path guide.
* Make sure the thread is hooked at the top corner
and positioned behind the transparent front cover.
a
a Thread take-up lever check window
b Transparent front cover
Memo
a Take-up lever
Look through the thread take-up lever check
window and check that the thread is correctly
fed through the take-up lever, turning the
handwheel toward you.
l l
l l
Lower the presser foot lever.
a
(B)
b
(C)
b
a
b
b Thread
m m m m
Holding the thread with both hands, pass
the thread through both the upper and
lower needle bar thread guides.
a Needle bar thread guide (upper)
b Needle bar thread guide (lower)
n n n n
Pass the thread through the eye of the
needle from front to back.
o o o o
Pass the thread through the presser foot,
and then pull out about 100-150 mm
(approx. 4-6 inches) of thread toward the
back of the machine.
a
a 10 cm-15 cm (approx. 4-6 inches)
p p p p
Press to unlock all keys and
buttons.
UPPER THREADING
1 a
2 b
1
33