Sewing Stitch Patterns; Sewing Attractive Finishes; Basic Sewing - Brother NV4500D Operation Manual

Computerized sewing and embroidery machine
Table of Contents

Advertisement

SEWING STITCH PATTERNS

SEWING STITCH PATTERNS

Sewing Attractive Finishes

To achieve attractive results when sewing character/decorative stitches, check the table below for the
proper fabric/needle/thread combinations.
Note
• Other factors, such as fabric thickness, stabilizer material, etc., also have an effect on the stitch, so you
should always sew a few trial stitches before beginning your project.
• When sewing satin stitch patterns, there may be shrinking or bunching of stitches, so be sure to attach
a stabilizer material.
• Guide the fabric with your hand to keep the fabric feeding straight and even during sewing.
Fabric
Thread
Needle
Presser foot

Basic Sewing

a
a
a
a
Select a stitch pattern.
b
b
b
b
Attach monogramming foot "N".
c
c
c
c
Place the fabric under the presser foot, pull
the upper thread out to the side, and then
lower the presser foot.
120
When sewing on stretch fabrics, lightweight fabrics, or fabrics with coarse weaves, attach stabilizer on the
wrong side of the fabric. If you do not wish to do so, place the fabric on a thin paper such as tracing paper.
a
b
a Fabric
b Stabilizer
c Thin paper
#50 - #60
With lightweight, regular, or stretch fabrics: the Ball point needle (golden colored)
With heavyweight fabrics: home sewing machine needle 90/14
Monogramming foot "N".
Using another presser foot may give inferior results.
N
c
d
d
d
d
Press the "Start/Stop" button to start
sewing.
• When sewing 7 mm satin stitch patterns and
the stitches are bunched, lengthen the stitch
length. If you continue sewing when the
stitches are bunched, the needle may bend or
break (see "Setting the Stitch Length" on page
49).
CAUTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

882-s94

Table of Contents