I Overcasting Using The Side Cutter - Brother NV4500D Operation Manual

SEWING THE STITCHES

I Overcasting Using the Side Cutter

By using the side cutter, you can do overcasting while cutting the fabric.
• Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit
the presser foot and break, possibly causing injury.
Memo
Thread the needle manually when using the side cutter, or only attach the side cutter after threading the
needle using the "Automatic Threading" button.
Stitch Stitch name
With side cutter
With side cutter
With side cutter
With side cutter
With side cutter
a a
a a
Select a stitch.
b b b b
Follow the steps on page 37 to remove the
presser foot.
76
CAUTION
Presser
Applications
foot
Straight stitch while cutting
fabrics
Zigzag stitch while cutting fabrics
Overcasting stitch while cutting
fabrics
Overcasting stitch while cutting
fabrics
Overcasting stitch while cutting
fabrics
Stitch width
[mm (inch.)]
Auto. Manual
0.0 0.0 - 2.5
(0) (0 - 3/32)
3.5 3.5 - 5.0
(1/8) (1/8 - 3/16)
3.5 3.5 - 5.0
(1/8) (1/8 - 3/16)
5.0 3.5 - 5.0
(3/16) (1/8 - 3/16)
5.0 3.5 - 5.0
(3/16) (1/8 - 3/16)
c c
c c
Position the fork on the side cutter's
operating lever onto the needle clamp
screw.
b
a Needle clamp screw
b Operating lever
Memo
Make sure that the fork of the operating lever
is set onto the needle screw firmly.
Stitch length
Twin
[mm (inch.)]
needle
Auto. Manual
2.5 0.2 - 5.0
NO
(3/32) (1/64 - 3/16)
1.4 0.0 - 4.0
NO
(1/16) (0 - 3/16)
2.0 1.0 - 4.0
NO
(1/16) (1/16 - 3/16)
2.5 1.0 - 4.0
NO
(3/32) (1/16 - 3/16)
2.5 1.0 - 4.0
NO
(3/32) (1/16 - 3/16)
a