Brother NV4500D Operation Manual page 258

ERROR MESSAGES
246
This message is displayed when,
after selecting a pattern,
, , ,
or is pressed and the
pattern is about to be deleted.
This message is displayed when
the speed control lever is set to
control the zigzag stitch width,
and the "Start/ Stop" button is
pushed. Use the foot controller
to operate the machine.
This message is displayed when
the machine is in embroidery edit
mode, and you try to use an
editing function when the pattern
is not completely within the red
outline.
This message is displayed when
you try to save a copyright
protected pattern to USB media/
Computer. According to
copyright laws, patterns that are
illegal to reproduce or edit
cannot be saved to USB media
or computer. If this message
displays, save the pattern in the
machine's memory.
This message is displayed when
the machine is in twin needle
mode and a pattern that cannot
be sewn with the twin needle is
selected.
This message is displayed when
the foot controller is pressed
while the embroidery unit is
attached and machine is set up
for embroidering.
This message is displayed when
there is a possibility that the data
for the selected pattern is
corrupted.
This message is displayed when
is pressed when
changing thread colors.
This message is displayed when
the feed dogs are raised while
the Embroidery or Embroidery
Edit screen is displayed.
This message is displayed when
either or is
pressed when the feed dogs are
lowered.