Random Track Play (Mix); Scanning All Tracks On All Cds (Scan); Pausing Playback (Pause) - Blaupunkt Lexington C32 Operating And Installation Instructions

CD CHANGER MODE

Random track play (MIX)

To play the tracks on the current CD in
random order,
briefl y press button 4 (MIX) <.
➮
"S--MIX" appears briefl y in the dis-
play.
To play the tracks on all inserted CDs
in random order,
keep the 4 (MIX) button <
➮
pressed for longer than two sec-
onds.
"D--MIX" appears briefl y in the dis-
play.
Canceling MIX
To stop the tracks from being played in
random order,
press button 4 (MIX) < until
➮
"S--MIX" or "D--MIX" disappears
and the standard CD changer
display reappears.
Scanning all tracks on all CDs
(SCAN)
Scanning tracks on the current CD
To briefl y play all the tracks on the cur-
rent CD in ascending order,
press button 2 (SCAN) <.
➮
12
01_BA_LexStLouisC32_GB.indd Abs1:12 01_BA_LexStLouisC32_GB.indd Abs1:12
"S--SCN" appears in the display.
Scanning the fi rst track on all CDs
You can briefl y play the fi rst track all
CDs in the CD changer.
keep the 2 (SCAN) button <
➮
pressed for longer than two sec-
onds.
"D--SCAN" appears in the display.
Stopping SCAN
To stop scanning,
➮
briefl y press the 2 (SCAN) button
< again.
The currently scanned track will then
continue to be played normally.
Note:
You can set the scanning time
●
(scantime). For further details,
read the section entitled "Setting
the scantime" in the "CD mode"
chapter.

Pausing playback (PAUSE)

➮
Press button 1
"S--PAUSE" appears in the display.
Canceling pause
➮
Press button 2
pause mode.
Playback is resumed.
) <.
) < while in
23.01.2007 12:19:20 Uhr 23.01.2007 12:19:20 Uhr