Wizard - Billion BiPAC 7404V series User Manual

Wizard

This section provides easy setup for your VoIP service. Phone port 1 and 2 can be registered to different SIP
Service Provider.
Voice QoS
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP
DSCP:
Marking allows users to classify traffic based on DSCP value and send packets to next Router.
Setting for Phone Port 1
SIP Service Provider:
done, respective parameters below are automatically displayed.
Select Profile: It allows you to select a desired SIP provider whom is not defined already in the SIP Service
Provider. You may manually setup the SIP accounts by entering SIP information to User-defined Profile.
See below for details.
This parameter holds the registration ID of the user within the SIP registrar.
Phone Number:
Authentication Username:
fill in the space with your username given by your SIP server.
Authentication Password:
registrar.
Setting for Phone Port 2
Click box of Same as Phone Port 1 to set phone port 2 be identical as phone port 1.
Please refer to descriptions in "Setting for Phone Port 1".
User-defined Profiles
Appendix A: Product Support and Contact Information
This section allows you to select the service provider. When the selection is
If the username is same as the Phone Number, leave it blank. Otherwise,
This parameter holds the password used for authentication within SIP
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
115