Configuration; Lan (Local Area Network); Bridge Interface - Billion BiPAC 7404V series User Manual

Configuration

When you click this item, you get following sub-items to configure the ADSL router.
LAN, WAN, System, Firewall, VPN
Server, Time Schedule and Advanced
These functions are described below in the following sections.

LAN (Local Area Network)

There are seven items within the LAN section:
Filter, Wireless, Wireless Security, Wireless Client Filter, Port Setting

Bridge Interface

You can setup member ports for each VLAN group under Bridge Interface section. From the
example, two VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in
this order.
Bridge Interface
Ethernet
Ethernet1
Ethernet2
Ethernet3
Management Interface: To specify which VLAN group has possibility to do device
Note: NAT/NAPT can be applied to management interface only.
Chapter 4: Configuration
(Only the 7404VGO has VPN features)
Bridge Interface, Ethernet, IP Alias, Ethernet Client
VLAN Port (Always starts with)
P1 / P2 / P3 / P4
P2 / P3 / P4
P3 / P4
P4
management, like doing web management.
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
and
DHCP
, VoIP, QoS, Virtual
Server.
30