Wizard - Billion BiPAC 7401VP User Manual

Wizard

This section provides easy setup for your VoIP service.
Voice QoS
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP
DSCP:
Marking allows users to classify traffic based on DSCP value and send packets to next Router.
Setting for Phone Port 1
SIP Service Provider:
is done, respective parameters below are automatically displayed.
Select Profile: It allows you to select a desired SIP provider whom is not defined already
in the SIP Service Provider. You may manually setup the SIP accounts by entering SIP
information to User-defined Profile.
Phone Number:
Authentication Username:
Authentication Password:
SIP registrar.
Chapter 4: Configuration
This section allows you to select the service provider. When the selection
This parameter holds the registration ID of the user within the SIP registrar.
Same as Phone Number.
This parameter holds the password used for authentication within
See below for details.
VoIP/(802.11g) ADSL2+ Router
73