Billion BiPAC 7404V series User Manual page 120

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
values for your environment. You should use these if the default values are incorrect and result in PSTN
calls not being detected properly, e.g. calls being terminated within 5 seconds of being answered. The
actual levels are determined by your environment including the number and type of telephones used.
Note: ONHOOK means hung up.
To take your phone OFFHOOK, lift the receiver then press Hook/Flash until you hear your normal PSTN
dialtone, not your VoIP dialtone. Wait several seconds and then press Check Level.
You should check the OFFHOOK value for each telephone you have connected to this device. Set the
OFFHOOK voltage to the lowest setting registered for all your telephones, e.g. if your telephones return
values of 4, 5 and 7 then you should set your OFFHOOK voltage to 4.
Note: The detected values will not automatically be set by the Check Level function; you must enter the
lowest level detected after testing all your telephones.
119
Appendix A: Product Support and Contact Information