Wizard Setup - Billion BIPAC 5102 Series User Manual

4.1 Wizard Setup

4.1.1 Wizard Setup
Use the Wizard Setup screens to configure your system for Internet access settings and fill
in the fields with the information in the Internet Account Information table of the Compact
Guide or Read Me First. Your ISP may have already configured some of the fields in the
wizard screens for you.
Mode: Select Routing (default) if your ISP allows multiple computers to share an Internet
account. Otherwise select Bridge.
Encapsulation: Select the encapsulation type your ISP uses from the Encapsulation
drop-down list box. Choices vary depending on what you select in the Mode field.
If you select Bridge in the Mode field, select 1483 Bridged IP.
If you select Routing in the Mode field, select PPPoA, 1483 Bridged IP, 1483 Router IP or
PPPoE.
Multiplex: Select the multiplexing method used by your ISP from the Multiplex drop-down
list box either VC-based or LLC-based.
Virtual Circuit ID: VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define
a virtual circuit.
VPI: Enter the VPI assigned to you. This field may already be configured.
VCI: Enter the VCI assigned to you. This field may already be configured.
20