General Settings - Billion BiPAC 7404V series User Manual

General Settings

This section reflects and contains basic settings for the VoIP module from selected provider in the Wizard
section. Fail to provide correct information will halt making calls out to the Internet.
SIP Device Parameters
To use SIP as VoIP call signaling protocol.
SIP:
Silence Suppression (VAD): Voice Activation Detection prevents transmitting the nature silence to consume
the bandwidth. It is also known as Silence Suppression which is a software application that ensures the
bandwidth is reserved only when voice activity is activated. Default is set to Enable.
Echo Cancellation: G.168 echo canceller is an ITU-T standard. It is used for isolating the echo while you
are on the phone. This helps you not to hear much of your own voice reflecting on the phone while you talk.
Default is set to Enable.
Provide the based value from the media (RTP) ports that are assigned for various
RTP Port:
endpoints and the different call sessions that may exist within an end-point. (Range from 5100 to
65535, default value is 5100)
This selection is a drop-down box, which allows user to select the country for which the
Region:
VoIP device must work. When a country is selected, the country parameters are automatically
loaded.
Voice QoS, DSCP Marking:
byte. DSCP Marking allows users to classify traffic based on DSCP value and send packets to next
Router.
Appendix A: Product Support and Contact Information
Default is set to Disable.
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
117