Adsl - Billion BiPAC 7404V series User Manual

ADSL

Connect Mode: The default setting is Multimode. This mode will automatically detect your ADSL
line code, G.dmt, G.lite, and T1.413. But in some area, multimode cannot detect the ADSL line
code well. If it is the case, please adjust the ADSL line code to G.dmt or T1.413 first. If it still fails,
please try the other values such as ALCTL, ADI, etc.
Note: If you have subscribed ADSL1 T1.413 mode line, you may go to the Advanced Options for
more connection module combinations.
Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking effect
with setting of Connect Mode.
Coding Gain: Configure the ADSL coding gain from 0 dB to 7dB, or automatic.
Tx Attenuation: Setting ADSL transmission gain, the value is between 0~12.
DSP FirmwareVersion: Current ADSL line code firmware version.
Connected: Display current ADSL line sync status.
Operational Mode: Display current ADSL mode standard (Operational Mode) your Router is using
when ADSL line has sync.
Annex Type: ADSL Annex A, which works over a standard telephone line. Annex B, which works
over an ISDN line.
Upstream: Display current upstream rate of your ADSL line.
Downstream: Display current downstream rate of your ADSL line.
Chapter 4:Configuration
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
55