Registered Dimms (Rdimms); Hard Drive - HP ProLiant DL160 Generation 6 Specification

QuickSpecs
Configuration Information - Factory Integrated Models
Memory

Hard Drive

Registered DIMMs (RDIMMs)

HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-10600R-9 Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
efficient
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SATA Non-Hot Plug 3.5" Midline (MDL) Drive
NOTE: A minimum of one SATA Non-Hot Plug hard drive is required ONLY when
purchasing Non-Hot Plug CTO Chassis Model (P/N 491531-B21) in Step 1.
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009
HP ProLiant DL160 Generation 6
http://www.hp.com/go/proliant-energy-
500656-B21
500658-B21
500660-B21
500662-B21
516423-B21
500666-B21
500668-B21
500670-B21
462595-B21
458941-B21
458939-B21
458947-B21
Page 17