HP ProLiant DL160 Generation 6 Specification page 33

Hide thumbs Also See for ProLiant DL160 Generation 6:
Table of Contents

Advertisement

QuickSpecs
Memory
HP ProLiant DL160 G6 (all models)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
4GB (2x2GB) or 6GB (3 x 2GB) depending on model, PC3-10600E Unbuffered UDIMM memory, with ECC.
Maximum Memory
Up to 192GB memory is available with the optional installation of quad-rank PC3-8500R-7 16GB Registered RDIMM memory kits.
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For servers with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
No mixing DIMM voltage; all DIMMs must be the same voltage
DIMM Type ->
DIMM Rank ->
DIMM Capacity ->
DIMM Native Speed (MHz) ->
SLOTS THAT CAN BE POPULATED
18 slot servers
MAXIMUM CAPACITY (GB)
18 slot servers
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
2 DIMM Per Channel
Dual Rank (2R)
2GB
4GB
1333
1333
18
18
36
72
1333
1333
1333
1333
DA - 13247
Worldwide QuickSpecs — Version 11 — 11.16.2009
HP ProLiant DL160 Generation 6
Registered DIMMs (RDIMMs)
8GB
8GB
1066
1333
18
18
144
144
1066
1333
1066
1333*
Unbuffered with ECC
DIMMs (UDIMMs)
Single
Quad Rank (4R)
Rank (1R)
4GB
16 GB
1GB
1066
1066
1333
12
12
12
48
192
12
1066
1066
1333
800
800
1066
Dual Rank
(2R)
2GB
1333
12
24
1333
1066
Page 33

Advertisement

Table of Contents
loading

Table of Contents