HP ProLiant DL160 Generation 6 Specification page 49

QuickSpecs
Technical Specifications
Non-Hot Plug SATA Hard
Drives
NC362i Integrated Dual
Port Gigabit Server
Adapter
160-GB 7.2K
458947-B21
Network Interface
Data Transfer Method Compliant to x1 PCIe Specification
Network Transfer Rate 10Base-T (Half-Duplex)
Connector
Cable Support
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009
Capacity
Height
Width
Depth
Interface
Transfer Rate Synchronous
(Maximum)
Seek Time (typical reads,
including settling)
Physical Configuration Bytes/Sector
Operating Temperature41° to 131° F (5° to 55° C)
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
10Base-T (Full-Duplex)
100Base-TX (Half-Duplex)
100Base-TX (Full-Duplex)
1000Base-TX (Half and
Full-Duplex)
RJ-45 connector
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethemet on standard Category 5 UTP
HP ProLiant DL160 Generation 6
160,041 MB
1.028 in (2.61 cm)
4.0 in (10.16 cm)
5.787 in (147.0 mm)
SATA ATA
1.5Gb/s
Single Track 0.9 ms
Average 9.0 ms
Full-Stroke 17.8 ms
Rotational Speed 7,200 rpm
512
Logical Blocks 312,581,808
10 Mb/s
20 Mb/s
100 Mb/s
200 Mb/s
2000Mb/s
Page 49