System Specifications - HP ProLiant DL160 Generation 6 Specification

QuickSpecs

System Specifications

Power
ProLiant DL160 G6 Fully Configured
Fully Loaded System Input Wattage (W)
Fully Loaded System Input Current (A rms)
Fully Loaded System Thermal (BTU- Hr)
Fully Loaded System VA (Volt-Amp)
System Inrush Current with all power supplies loaded (A)
Power cord requirements
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2)
PCI cards.
Power Cord
Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that
allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected
to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a
user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord
(227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009
HP ProLiant DL160 Generation 6
115V/60Hz
448
3.833
1529
449
10.1
Nema 5-15P to IEC320-C13
AF556A
220V/50Hz
445
2.046
1518
454
10.96
IEC320-C13 to IEC320-C14
Page 46