Hard Drive - HP ProBook 4710s Maintenance And Service Manual

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.
Description
500-GB, 7200-rpm hard drive
500-GB, 5400-rpm hard drive
320-GB, 7200-rpm hard drive
320-GB, 5400-rpm hard drive
250-GB, 7200-rpm hard drive
250-GB, 5400-rpm hard drive
160-GB, 7200-rpm hard drive
160-GB, 5400-rpm hard drive
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
6. Remove the palm rest (see
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×4.0 screws (1) that secure the hard drive to the computer.
3. Loosen the Phillips PM2.5×10.0 captive screw (2) that secures the hard drive to the computer.
4. Grasp the Mylar tab (3) on the hard drive and slide the hard drive to the right to disconnect it from
the system board.
52 Chapter 4 Removal and replacement procedures
Battery on page 41).
Switch cover and keyboard on page
Palm rest on page 50).
Spare part number
574720-001
535765-001
574719-001
535764-001
572817-001
535763-001
572816-001
535762-001
42).