HP ProBook 4710s Maintenance And Service Manual page 53

Remove the switch cover and keyboard:
1. Remove the following screws:
(1) Two screw covers and two Phillips PM2.5×3.0 screws
(2) Three Phillips PM2.0×3.0 broadhead screws
(3) Two Phillips PM2.0×3.0 screws
2. Turn the computer right-side up, with the front toward you.
3. Open the computer as far as possible.
4. Slide the switch cover back (1) and lift it straight up (2) until it disengages from the computer.
Component replacement procedures 43