HP ProBook 4710s Maintenance And Service Manual page 54
Notebook pc
Hide thumbs
Also See for ProBook 4710s:
- Quickspecs (33 pages) ,
- Specification (32 pages) ,
- Brochure & specs (6 pages)
Table of Contents
Advertisement
5.
Remove the two PM2.5×4.5 screws that secure the keyboard to the computer.
6.
Slide the keyboard back (1), and rotate it forward (2) until it rests on the base enclosure.
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
disconnect the keyboard cable (2) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the switch cover and keyboard.
44
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
