Optical Drive - HP ProBook 4710s Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
Blu-ray ROM with LightScribe DVD±RW SuperMulti DL Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the optical drive:
1. Position the computer with the front toward you.
2. Remove the slotted PM2.5×4.5 screw (1) that secures the optical drive to the computer.
3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the left to release the optical drive from the computer.
4. Remove the optical drive (3) from the computer.
Battery on page 41).
Switch cover and keyboard on page
Spare part number
535761-001
535759-001
535760-001
Component replacement procedures
42)
47