Network) Jack - HP ProBook 4710s Maintenance And Service Manual

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the system board (1),
(2), and (3) and the heat sink components (4), (5), and (6) and must be replaced each time the heat
sink is removed. Replacement thermal material is included with all heat sink, system board, cable, and
processor spare part kits.
RJ-45 (network) jack
NOTE: The Cable Kit includes replacement thermal material.
Description
Cable Kit
Before removing the RJ-45 (network) jack, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
76 Chapter 4 Removal and replacement procedures
Battery on page
Switch cover and keyboard (see
Memory module (see Memory module on page
Optical drive (see Optical drive on page
Speakers (see Speakers on page
Palm rest (see Palm rest on page
WLAN module (see WLAN module on page
Hard drive (see Hard drive on page
Spare part number
535757-001
41).
Switch cover and keyboard on page
45)
47)
49)
50)
55)
52)
42)