HP ProBook 4710s Maintenance And Service Manual page 102

Boot options
Device Configurations
92 Chapter 5 Computer Setup
●
Set an f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
● Enable/disable floppy boot.
●
Enable/disable internal network adapter boot.
●
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
● Set the Express Boot Popup delay in seconds.
●
Set the boot order.
◦
1st boot device: USB CD-ROM
◦ 2nd boot device: USB floppy
◦ 3rd boot device: USB SuperDisk
◦
4th boot device: Notebook hard drive
◦ 5th boot device: USB hard disk
◦ 6th boot device: Network controller
●
Swap the functions of the
●
Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:
◦ Use of a USB keyboard in Computer Setup even
when a your operating system is not running.
◦
Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
●
Enable/disable BIOS DMA data transfers.
●
Enable/disable fan always on while connected to an AC
outlet.
●
Enable/disable data execution prevention.
●
Enable/disable LAN power saving mode.
● Enable/disable SATA Native Mode.
● Enable/disable Dual Core CPU.
●
Enable/disable HDD translation mode.
fn key and left ctrl key.