Display Controls - Barco Coronis 5MP Mammo Online User's Manual

Display information

Display controls

Overview of controls
Power LED
1.
The LED is off when the display is disconnected from the power.
The LED is also off when the LED function is disabled in the on-
screen display (OSD).
The LED is green when the display is on (when enabled in the
on-screen menus).
The LED is orange when the display is in Stand-by power-saving
mode.
USB downstream port.
2.
Control wheel
3.
The control wheel can be pressed like a push button and rotated
like a knob.
It allows to put the display in stand-by, navigate through the on-
screen display (OSD) menus and change values in the OSD.
22
1
2
Figure 5: Front side
3