Table of Contents
Advertisement
User Manual
Layer 2
Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is
only configurable on the WAN interfaces as VLAN is only supported on the WAN side in
the current software release.
Layer 2
Field
Description
Interface
Select the WAN interface here to configure the CoS for incoming traffic. Only WAN
interface can be selected as VLAN is currently supported only on the WAN side.
Class of Service
The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5,
and CoS6.
User Priority
The selections are 0, 1, 2, 3, 4, 5, 6, and 7.
To access Ingress Layer 2:
From the Advanced Menu, select QoS > Ingress.
Page 60 of 92
Advertisement
Table of Contents
Need help?
Do you have a question about the Ethernet USB Combo Router and is the answer not in the manual?
Questions and answers