Table of Contents
Advertisement
Web Access Control
The Web Access Control page allows you to access the router via the web from a remote
location like your home or office.
Web Access Control
To configure Web Access:
1. From the Advanced Menu, select Application > Web Access Control.
2. Select Enable Web Access Control.
3. Select the Connection.
4. Configure the following fields:
Remote Host IP
Remote Netmask
Redirect Port
5. Click Submit to temporarily activate the settings on the page. The WAN address is
now added into the IP Access List. This allows you to access you router remotely.
6. To make changes permanent, click Save Settings.
User Manual
Page 53 of 92
Advertisement
Table of Contents
Need help?
Do you have a question about the Ethernet USB Combo Router and is the answer not in the manual?
Questions and answers