Specification - Axminster Pillar Drills User Manual

may have been used in setting up operations and put
them away in their correct stowage positions.
7. Try to arrange the drilling operation so that the drill
tip does not come in contact with the table.
8. Always allow the drill to stop before removing
drillings or swarf from around the job or the table.
9. NEVER remove 'flying' swarf strands from the drill
whilst it is turning.
10. It is a good precaution to wear eye protection
when drilling, especially using small drills, or very
hard material that produces small chips.
Model
Code
Rating
Power
Speed Range
Throat
Chuck Cap/Type
Chuck Travel
Max Chuck to Table
Max Chuck to Base
Diameter of Column
Table Size
Table Tilt
Base Size
Overall L x W x H
Weight
Model
Code
Rating
Power
Speed Range
Throat
Chuck Cap/Type
Chuck Travel
Max Chuck to Table
Max Chuck to Base
Table Size
Table Tilt
Base Size
Overall L x W x H
Weight
General Safety Instructions for Drilling Machines
ED16F2
505024
Trade
650W 230V
120-2580 rpm
178mm
3-16mm keyless
80mm
680mm
1,170mm
80mm
290 x 290mm
45° - 0 - 45°
450 x 270mm
710 x 350 x 1,645mm
88kg
ED16SB
700101
Hobby
370W
(5) 460-2890rpm
127mm
16mm keyless
60mm
315mm
430mm
200 x 200mm
45° - 0 - 45°
340 x 210mm
310 x 520 x 840mm
37kg
11. It is not a good idea to wear gloves when
operating a drill press.
12. After the job is completed, remove all tools and
accessories from the machine, check that drill bits are
still sharp and re-use able.
13. Clean the machine down thoroughly, including
removing coolant or cutting compounds from the
drill table.
14. Lightly coat all metal surfaces with a light oil
coating.
15. Disconnect the machine from the supply. Secure
the cable/plug clear of the floor.
Model
Code
Rating
Power
Speed Range
Throat
Chuck Cap/Type
Chuck Travel
Max Chuck to Table
Max Chuck to Base
Diameter of Column
Table Size
Table Tilt
Base Size
Overall L x W x H
Weight
Model
Code
Rating
Power
Speed Range
Throat
Chuck Cap/Type
Chuck Travel
Max Chuck to Table
Max Chuck to Base
Table Size
Table Tilt
Base Size
Overall L x W x H
Weight
7

Specification

ED16B2
700100
Trade
650W
120-2580 rpm
178mm
3-16mm keyless
80mm
310mm
510mm
80mm
290 x 290mm
45° - 0 - 45°
450 x 270mm
710 x 350 x 1,015mm
82kg
WD13L
700099
Hobby
250W
(5) 600 - 2,500rpm
105mm
13mm keyless
50mm
215mm
370mm
160 x 160mm
45°-0-45°
290 x 180mm
240 x 470 x 735mm
20kg