What's In The Box - Axminster AWEBDS46 MkII User Manual

What's in the Box

Model Number:
Box:
1 No. Belt & Disc Sander
(Sanding Belt Fitted)
1 No. 150mm Sanding Disc
1 No. Disc Table
1 No. Disc Table Support Bracket
Bag 1 Containing:
4 No. M6 Bolts
5 No. M6 Washer
1 No. Star Knob Threaded Bolt
Bag 2 Containing: Adjustable Fence Assembly Part 1
1 No. Mounting Guide Assembly, two
rods shouldered and threaded
at each end, with a metal strap
and 4 nuts and 2 washers.
Bag 3 Containing: Adjustable Fence Assembly Part 2
1 No. Concave Bracket Casting
1 No. Fence with Base Plate Casting
Having opened the box, remove all the components stowed in the packaging. Place these
carefully to one side. Remove the top packaging and lift the machine out of the box and place
upon a clear flat surface, taking care not to trap or pinch the power cable under the chassis.
Remove any other items from the box. Having unpacked your sander and its various
components, if you do not wish to retain the packaging please dispose of it responsibly,
especially any polystyrene; most of the rest of the packaging is biodegradable.
Please read though the Section entitled Identification and Description of parts of the Sander, as
this will ensure that you better understand the terminology we will use during the assembly and
setting up phases.
NOTE: Please read the Instruction Manual prior to using your new machine; as well as the
operating procedures for your new machine, there are numerous hints and tips to help you to use
the machine safely and to maintain its efficiency and prolong its life. Keep this Instruction Manual
readily accessible for any others who may also be required to use the machine.
04
1 No. Work Stop Plate
1 No. Sanding Disc Cover Plate
1 No. Mitre Fence
1 No. Instruction Manual
2 No. M4 Phillip Head Screws
4 No. Shake Proof Washers.
1 No. Adhesive Scale Label
1 No. Tower Bracket Casting, with
two butterfly thumb screws.
MM491E