Threading The Label Roll At The Dispensing Edge - Avery Dennison ALS 204 User Manual

3 B
EFORE OPERATION
3.2 I
NSERTING LABEL MATERIAL
Threading the label roll at the dispensing
edge
Fixed [41] (standard) and pivotable L-Shape dispen-
sing edges:
Unroll around 1 m of label strip and remove the

labels from it.
Pass the backing paper around the first deflection

roller [41A] and through the slot in the sensor [41B].
Feed the backing paper under the pressure roller

[41C] to the dispensing plate [41D].
Feed the backing paper around the dispensing plate

to the second deflection roller [41E].
Spring loaded [42] and pneumatic [43] L-Shape dispen-
sing edges:
Additionally pass the backing paper between the

two slim deflection rollers at the joint [42A] [43A].
A
[43] Path of the label strip at the pneumatic dispensing edge (option).
E
A
[41] Path of the label strip at the dispensing edge.
A 1st deflection roller
B Label sensor
C Pressure roller
D Dispensing plate
E 2nd deflection roller
A
[42] Path of the label strip at the spring loaded dispensing edge
(option).
43
A
B
ALS
20x
256
GB
C
D
A