Horizon Fitness CLUB E500 User Manual page 7

ASS E MB LY ST EP 
PEDAL ARM
E800 SHOWN
A) Open HARDWARE BAG FOR STEP 6.
B) Place WASHER (F) over the LINK ARM axle.
C) Slide LINK ARM into PEDAL ARM.
D) Attach FOOTPAD BRACKET to the LINK ARM with 3 SCREWS (G).
E) Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
C) 29mm wave washer
A) M5x20mm Screw
quantity: 2
quantity:4
SCREW (E) SCREW (F)
B) M5x15mm Screw
20 mm 15 mm
quantity:8
12
Qty: 4 Qty: 8
E500-E800_Rev.1.7.indd 12-13
LINK ARM
SCREW (G) FOOTPAD BRACKET WASHER (F)
SCREW (G)
WAVE WASHER (F)
15 mm
20 mm
Qty: 6
Qty: 2
D) M8x15mm Screw
quantity:6
ASSEMBLY STEP 7
FOOTPAD
A) Open HARDWARE BAG FOR STEP 7.
B) Insert SPACER (H) into the LOWER HANDLEBAR. Place SPACER RINGS (G) on both sides of SPACER (H), slide
LOWER LINK ARM into bottom end of LOWER HANDLEBAR.
C) Insert BOLT (I) into LOWER HANDLEBAR and secure using NUT (J) and WASHER (K).
D) Repeat on other side.
A) M5x20mm Screw
quantity:4
HARDWARE BAG FOR STEP 7 CONTENTS :
SPACER RING (G)
Qty: 4
B) M5x15mm Screw
quantity:8
LOWER
LOWER LINK ARM
HANDLEBAR
SPACER RINGS
SPACER
LOWER HANDLEBAR
NUT (J)
WASHER (K)
BOLT (I)
SPACER (H)
SPACER RING (G)
C) 29mm wave washer
quantity: 2
SPACER (H)
Qty: 2
NUT (J) WASHER (K)
D) M8x15mm Screw
Qty: 2 Qty: 2
quantity:6
BOLT (I)
45 mm
Qty: 2
1
4/27/07 1:43:53 PM