Horizon Fitness CLUB E500 User Manual page 5

AS SE MB LY ST EP 2
SCREW (B)
A) Open HARDWARE BAG FOR STEP 2.
B) Secure REAR STABILIZER to MAIN FRAME using 2 SCREWS (B).
NOTE: Make sure holes are aligned before inserting SCREWS.
HARDWARE BAG FOR STEP 2 CONTENTS :
8
E500-E800_Rev.1.7.indd 8-9
MAIN FRAME
REAR STABILIZER
SCREWS (B)
30 mm
Qty: 4
SPRING WASHER (B)
FLAT WASHER (C)
ASSEMBLY STEP 
* NOTE: Be careful not to
pinch any wires while
assembling the mast.
BOLTS (C)
LOCK WASHERS (D)
A) Open HARDWARE BAG FOR STEP 3.
B) Slide the GROMMET and TOP COVER over the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D) Attach CONSOLE MAST to MAIN FRAME using 7 BOLTS (C) and 7 LOCK WASHERS (D)
E) Slide GROMMET and TOP CAP down to seal the MAIN FRAME.
HARDWARE BAG FOR STEP  CONTENTS :
BOLTS (C)
15 mm
Qty: 7
CONSOLE MAST
GROMMET
TOP COVER
CONSOLE WIRES
MAIN FRAME
.
LOCK WASHER (D)
13.5 mm
Qty: 7

4/27/07 1:43:48 PM