General Information; Scope; Reports; Storage - ATN ots-14 Operator's Manual

Thermal imaging system

Hide thumbs Also See for ots-14:

Table of Contents

1.1 GENERAL INFORMATION

This manual contains instructions for use in operating

and maintaining the ATN OTS -14 thermal imaging sys-

tems. Throughout this manual, the ATN OTS -14 will be

referred to as the scope or OTS.

Reports from the user on recommendations for improvements are

encouraged. Send reports to the address below.

Storage of OTS should be done in the factory packing and after a

thorough PMCS as outlined in Section 4.1. of this manual. This will

ensure the scope remains in mission ready condition during stor-

age. Battery should be stored separately from the scope.

The scope should not be placed on the floor, in any area exposed

to high temperatures or direct sunlight. Presence of acid and al-

kaline vapor, as well as of other aggressive admixtures in the air

is unacceptable.

1-2

American Technologies Network Corp.

1341 San Mateo Avenue

South San Francisco, CA 94080

(800) 910-2862

(650) 989-5100

(650) 875-0129 fax

info@atncorp.com

www.atncorp.com

Table of Contents