Neck Strap Installation; Tripod Installation - ATN VOYAGER 3 Operator's Manual

2.1.2. NEcK STRaP INSTallaTION

pass the end of the strap through the bi-ocular's strap mount eyelet
from the bottom. then pass it through the strap's buckle as shown
in the Figure 2-3. pull the strap to take up any slack and make sure
the strap will not loosen from the buckle.
FIGuRE 2-3. NEcK STRaP INSTallaTION

2.1.3. TRIPOD INSTallaTION

voyager can be used on the tripod. to install the tripod, screw it in
the 1/4" threaded socket of bottom rail of Voyager.
NOTE
Severe damage to the unit can occur if the tripod collapses or is
knocked over. It is recommended that the Voyager be removed if
the user is not within arm's reach of the tripod.
1/4" TRIPoD SoCKeT
FIGuRE 2-4. TRIPOD INSTallaTION
2-3