ATN VOYAGER 3 Operator's Manual page 13

Night vision bi-oculars
Table of Contents

Advertisement

F. automatic Highlight Protective System
The Automatic Highlight Protective System analyzes light exposure
with the sensor. If the level of light exposure exceeds allowable the
green indicator will light on in the Fov. If high light exposure is kept
more than 10 seconds the IIt will automatically turn off. If the unit
will move from the bright/excessive light the IIt will turn on again.
cauTION
The system works only when the sensor cap not cover the light
sensor.
NOTE
The protective system indicator will have orange colour when
the Proximity Sensor mode is on.
NOTE
The automatic Highlight Protective System and automatic
brightness control System do not protect a bi-ocular from
damage by bright light sources (a fire, headlights of the auto-
mobile, lanterns, etc.). Do not point the device at a bright light
source.
G. automatic Shut-off System
the automatic Shut-off System tracks when the unit is not used
(the controls are not touched for 60 minutes continuous) and shuts
the unit off automatically.
H. low battery Indicator
When red indicator in the Fov starts blinking it is time to change
your battery.
1-7

Advertisement

Table of Contents
loading

Related Products for ATN VOYAGER 3

This manual is also suitable for:

Voyager 5

Table of Contents