Preparing The Binocular; Attaching The Neck Strap - ATN Omega 10x42RF User Manual

guaranteed by the lifetime manufacturer's defect warranty on all of the
models in the omega line.
ATN's 10x42rF daytime omega class binoculars are the quintessential
professional binoculars. They provide a sharp stable image with excel-
lent low-light performance.
Features multi-coated optics for superior light transmission, individual
diopter focus for clearer images, built-in range finder reticle and full
rubber armouring for increased shock resistance.
The combination of waterproof and high quality optics make it the per-
fect binocular for military, law enforcement, boating as well as for most
hunting uses.
Meets standards and requirements of MIL-STD810 for a lifetime of high
performance.

pREpARING THE BINOCULAR

Your ATN OMEGA Series binocular comes with a neck strap. We rec-
ommend that you install the neck strap and use it whenever you are
using the binocular.
NOTE: Many accidents can be avoided by using the neck strap.

ATTACHING THE NECK STRAp

Thread the neck strap through the neck strap loop on the body of the
binocular.
Bring the end of the strap back to the neck strap buckle. Thread the
neck strap end from the back, through the buckle, as shown in the illus-
tration. This will secure the neck strap. Using the same procedure on
the other side, adjust the length of the neck strap for the comfort of the
user.
OCULAR LENS COVER
The ocular lens cover or "rain guard" has a loop for the neck strap to
thread through one side. This cover protects the ocular lenses from
debris and rain while the binocular is being carried by use of the neck
strap. The rain guard hangs down out of the way when the binocular is
being used.
ADJUSTING THE BINOCULAR FOR USE
All binoculars must be adjusted to the individual using the binocular.
The following procedures will assure maximum enjoyment and proper
use.
3