Table of Contents
Advertisement
featureS
• High Quality light intensifier tube
• Super fast lens system provides the user
with a clear and sharp image
• Built-in Infra-Red illuminator lets you see
even in total darkness
• Interchangeable lenses for different mag-
nification
SpecificationS
Magnification ................................................. 3X (optional 5X)
Lens System .................................................. 50mm F1:1.2
Field of view ................................................... 18°
Diopter adjustment ......................................... ±5
Range of Focus .............................................. 3m to
Power Supply ................................................. 1.5V AA or 3V CR123A Lithium battery
Battery Life ..................................................... 30 hours (15 hours w/IR illuminator)
Operating Temperature .................................. -40°C to +50°C
Storage Temperature ..................................... -50°C to +70°C
Weather resistant ........................................... Yes
Dimensions .................................................... 210x75x60 mm (8.2" x 2.9" x 2.3")
Weight ............................................................ 0.65kg (1.4 lb)
* ATN reserves the right to change the above specifications at any time without notice
application
The Night Spirit is rugged and lightweight night vision monocular. It utilizes multicoated optics
specially coated to gather light to provide bright and clear images. Couple these optics with
state of the art quality image intensifier tubes and the Night Spirit is an excellent compact pocket
scope. The Night Spirit is an amazing combination of versatility, performance, and price.
The Night Spirit night vision monocular is a complex opticoelectronic system for individual
use. The device consists of the objective lens assembly, eyepiece and the body. The body
contains an image intensifier tube assembly with an integrated high voltage power source and
the battery housing.
Objective lens protective cover is intended to protect the objective lens from dust and
scratches. It also acts as a daylight filter, allowing you to test the scope in daylight or other
bright light situations. The pinhole in the center of the protective cover allows the user to check
the operation ability of the device in daylight conditions.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for
more than ten (10) minutes.
Battery inStallation
install standard AA batteries as follows:
1. Unscrew the battery cap(A).
2. Insert AA battery(B), observing the polarity as indi-
cated.
3. Replace the battery cap and screw cap hand tight.
• Rugged and versatile design
• Single switch knob operation
• Camera/camcorder-adaptable
• Flexible carrying case
• Uses one AA or Lithium battery
• Weather resistant
A
B
2
Advertisement
Table of Contents
