Installation Procedures; Battery Installation - ATN PS-7 Operator's Manual

2.1. INSTAllATION PROCEDURES

2.1.1. BATTERY INSTAllATION

NOTE
At operating temperatures below –20°C (–4°F), alkaline batteries
are not recommended, as operating life will be severely reduced.
lithium-iron disulfide 1.5V AA batteries or equivalent should be
used below –20°C (–4°F).
BATTERY TYPE
Cr123a
Standard aa
the atn PS-7 operates with one Cr123a battery or one aa battery
using the battery adapter.
A. Install standard CR123A batteries as follows:
With the battery adapter screwed in as shown on Figure 2-1 you may
use one Cr123a 3v lithium battery.
FIGURE 2-1. CR123A TYPE BATTERY INSTAllATION
B. Install AA batteries as follows:
to install a aa battery, take the battery adapter out of the battery cap,
turn it over, and screw its smaller threading into the same battery cap.
2-2
TABlE 2-1 ESTIMATED BATTERY lIFE
Cr123
Battery
USAGE
60 Hours (Gen. 2+)
50 Hours (Gen.3 and 4)
30 Hours(Gen. 2+)
25 Hours (Gen.3 and 4)
Battery
CaP
Battery
aDaPter