Standard Components - ATN VOYAGER 3 Operator's Manual

is shown in Figure 1-4 and listed in table 1-3.
IR Illuminator Kit
1
ITEM
1 Ir450-B4 Illuminator
2 Cr123a type battery
3 1.5 mm Allen Key
4 Ir450 Wrench

STaNDaRD cOMPONENTS

1) aTN Voyager bi-ocular
the bi-ocular night vision device with 3x or 5x magnification.
2) Objective lens cap
lens cap with Ir Filter used to protect the lens and for testing
the unit in the daylight.
3) Eye cups
rubber cups used to protect eyepiece and for operator com-
fort.
4) cap of Highlight Protective System Sensor
The cap deactivates the sensor of Highlight Protective Sys-
tem for operating at changing light conditions.
5) Hand Strap
enables to keep the voyager in the hand for comfortable us.
6) battery adapter
allows the atn voyager to accept the Cr123a lithium and
aa size batteries to power the unit. Installed in the battery
cap in Cr123a usage position.
7) cR123a, lithium battery
Cr123a lithium batteries used to power the unit.
2
FIGuRE 1-4. IR450 IR IlluMINaTOR KIT
TablE 1-3. IR450 KIT
DEScRIPTION
3 4
qTy
1
1
1
1
1-11