Download Print this page

Advertisement

Quick Links

PD - 2601 / 2602 Series
User's Manual
Rev. A0
FCC Notes:
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to
comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protection against interference when
operated in a commercial environment. Operation of this equipment in a residential area
is likely to cause interference in which case the user at his own expense will be required
to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Inc. 2006
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 19460901120

Advertisement

loading
Need help?

Need help?

Do you have a question about the PD-2601 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX PD-2601 Series

  • Page 1 PD - 2601 / 2602 Series User’s Manual Rev. A0 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment.
  • Page 2: Brief Introduction

    BRIEF INTRODUCTION THE PRODUCT The PD-2601 is a pole mount customer display option designed for Posiflex HT series POS terminals and also the PB series discrete systems . The PD-2602 is a pole mount customer display option designed for Posiflex KS or TP series touch POS terminals.
  • Page 3 INSTALLATION GUIDES HOST SYSTEM PREPARAION For serial interface (RS232) PD-2601or PD-2602 to be used in HT or PB or KS or TP series, you have to adjust during power off the internal jumper of the host system to supply 5 V DC to the COM port selected for the serial interface pole display.
  • Page 4 Find joining points on pole display base B’ B’ C’ C’ A’ A’ Pix. 3 Take PD-2601 out of its box and refer to Pix. 3 that is a picture of the pole display base unit (lowest part of the PD) with 2 enlarged portions to the right and a slightly enlarged side view picture to the left to find 2 bottom locking lugs A’;...
  • Page 5 B+B’ B+B’ A’ Pix. 5 Please note the importance of keeping the leftward pressure on bottom end of pole display during the process of turning the pole upright and inserting the locating bosses B’ or even when you want to release the locating bosses B’...
  • Page 6 Fixing pole display base to system To fix the PD-2602 to base of KS or TP systems, please connect the interface cable of PD-2602 through the cable exit in base as in Pix. 9 a peeping view of pole display joint base bottom to the appropriate port in Pix.
  • Page 7 POWER ON SIGN With interface cable connection well installed (and with COM port power set for serial models), turn on the HT or KS or TP Posiflex POS system, a firmware identifier as power on sign will appear on the pole display screen for a while to indicate that pole display is self-tested O.K.
  • Page 8 USING THE CUSTOMER DISPLAY INTERRFACE SELECTION This series of customer display is designed to serve in HT / KS / TP series Posiflex POS systems with RS232 interface models and with USB interface models. It is advisable to well study the I/O port availability of the host system before determining which interface model to be used.
  • Page 9: Specification

    SPECIFICATION OPTICAL Number of digits 20 digits/row, 2 rows Dot matrix 5 X 7 dots Digit height 9.03 mm Digit width 5.25 mm Display color Green (505 nm) MECHANICAL Total Height (PD-2601) 486 mm Total Height (PD-2602) 330 mm Display Head Height 28.2 mm Display Head Width 196.6 mm...
  • Page 10 APPENDIX FONT PAGES Hex code Deci-code Code page number Language PC437 English-European Katakana (English-Japanese) PC850 Multi-lingual PC860 Portuguese PC863 Canadian-French PC865 Nordic Russian Albic PC858 Euro PC437G Greek Win1257 Windows Baltic Win1253 Windows Greek The list of commands available in each mode can be found in the appendix.

This manual is also suitable for:

Pd-2602 series