Download Print this page
POSIFLEX PD-300 Series Manual

POSIFLEX PD-300 Series Manual

2 x 20 lcd customer display

Advertisement

Quick Links

PD-300 SERIES
2 X 20 LCD
CUSTOMER DISPLAY
PD303
Rev. D0
FCC Notes:
PD302
This equipment generates, uses, and can radiate radio
PD305
frequency energy and, if not installed and used in
accordance with the instructions manual, may cause
interference to radio communications. It has been tested
and found to comply with limits for a Class A digital
device pursuant to subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection
PD306/U
PD307/U
PD308/U
against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in
which case the user at his own expense will be required to take whatever measures to correct the
interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
will assume no liability for any technical inaccuracies or editorial or other errors or omissions
contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including
without limitation loss of data or profits, resulting from the furnishing, performance, or use of this
material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex Technology, Inc. reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from web sites:
http://www.posiflex.com
or
http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.
© Copyright Posiflex Technology, Inc. 2011
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 19430900070

Advertisement

loading
Need help?

Need help?

Do you have a question about the PD-300 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX PD-300 Series

  • Page 1 All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product.
  • Page 2: Model Numbers

    The power adaptor for PD-300 supplies 12VAC, the power adaptor for PD-300U can either be the 12V AC one or the + 24V DC power adaptor for Posiflex POS printer and to support the printer through use of on option cable.(P/N: 21863250900)
  • Page 3 interface cable to support the operation of the customer display. For PD-302, please separate the main unit of host system (TP series) from the base and open the service window on back of main unit as described in User’s Manual of the system.
  • Page 4 “+24 V DC Out” jack in the connector area and insert the other end to the power connector of Posiflex POS printer if needed. Be sure to hear a click at each connection to obtain a firm contact. You may now place the base on a horizontal surface and prepare to power on and adjust the direction of the display head for best viewing effect in application.
  • Page 5 PD-303: Adhere the two pieces of EVA tape on the metal plates at bottom as indicated in picture at right. Peel off the protective covers of the tape to stick PD303 series on a flat and clean surface Apply the screws at 2 arrows in the right picture for firm fixation on counter if necessary.
  • Page 6 Please then refer to the pictures below for the base unit (lowest part) of PD-307 / PD-307U with 2 enlarged portions to the right and a slightly enlarged side view picture to the left to find 2 bottom locking lugs A’; 2 short cylindrical locating bosses B’...
  • Page 7 Please note the importance of keeping the leftward pressure on bottom end of pole display during the process of turning the pole upright and inserting the locating bosses B’ or even when you want to release the locating bosses B’ away from I/O plate B and turn the upper end of pole display to left to remove the locking lugs A’...
  • Page 8: Driver Installation

    9600 bps, none parity, 8 data bits, 1 stop bit with hardware handshaking on CTS signal to the COM port used. No other driver installation is required. FOR USB INTERFACE MODELS: Copy the driver and library from Posiflex Product Information CD under \Drivers\PD23_26U your system...
  • Page 9 OPOS Control Manager. To add the customer display under OPOS control please set in OPOS Control Manager device name “PD3x-Line Display” in the top row. For RS-232 models, select the COM port in the 3 row and set baud rate to “9600” in 4 row as in the left sample screen below.
  • Page 10: Specification

    SPECIFICATIONS ITEM SPECIFICATION Display type LCD, STN positive transflective with back light Number of digits 20 digits/row, 2 rows Character color Dark blue Back light color Yellow green Wave length 570 nm Max. brightness 150 cd/m Active display area 142.8 mm (W) x 20.64 mm (H) Character height 9.66 mm Character width...