Advertisement
6
Put the Soft water booster in the bowl with the water/salt solution
for at least 1 hour. Make sure the Soft water booster is completely
submerged.
Note: The minimum submersion period is 1 hour. You can always submerge the
Soft water booster longer.
7
Take the Soft water booster out of the bowl. Throw away the water/
salt solution and rinse the bowl.
8
Fill the bowl with at least one litre of fresh ambient water again and
put the Soft water booster in the bowl for 5 minutes. Make sure the
Soft water booster is completely submerged.
9
Remove the Soft water booster and reattach it to the raw water
tank.
10
Put the top cover back onto the appliance.
storage
If you want to store the water purifier, you have to empty all the water out
of it.
1
Lift the water purifier from your dispenser.
2
Pour all the water out of the raw water tank and the clean water
tank.
3
See the sections below for what to do with the filters.
Storing the Long-life filter and rust & sediment pre-filter
Unpacked Long-life filters and rust & sediment pre-filters cannot be stored.
If you do not intend to use the filters for quite some time, discard them.
English
19
Advertisement
