Advertisement
MAX
5
Put the top cover on the raw water tank.
Note: The rust & sediment filter, its holder and its lock are already present in
the top cover when you unpack the appliance.
6
The water purifier is now completely assembled and ready to be
flushed.
Flushing the water purifier
1
Place the water purifier on the dispenser you want to use.
2
Press the lid release area to open the top cover lid.
The display lights up.
,
3
Use a large jug to fill the raw water tank completely.
The raw water tank has a capacity of 7 litres.
Note: The maximum indication line for the raw water tank is on the rust &
sediment pre-filter holder.
4
Close the lid.
5
Wait until all the water has flowed into the clean water tank.
Note: If there is a water tank inside your dispenser, the filtered water flows into
the water tank first.
6
Place a large container (e.g. a bucket) under the water spout or
spouts of your dispenser.
7
Open the spout or spouts of your dispenser and let all the water in
the clean water tank flow into the container.
8
Throw away this filtered water.
Using the water purifier
1
Place the clean water tank on top of the dispenser you want to use.
2
Press the lid release area to open the top cover lid.
The display lights up.
,
3
Use a large jug to fill the raw water tank.
English
11
Advertisement
