Routing - TP-Link TD-W8960N User Manual

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
there still has surplus bandwidth, it is allocated to the rule with hypo-high precedence. For rules
with the same precedence, the surplus bandwidth is allocated to them according to their min
egress/ingress rate. The greater a rule's min egress/ingress rate is, the more bandwidth it gets.

4.4.10 Routing

Choose "Advanced Setup" "Routing", it includes three menus: Default Gateway, Static Route
and RIP (shown in Figure 4-51). The detailed descriptions are provided below.
Figure 4-51
4.4.10.1 Default Gateway
Choose "Advanced Setup" "Routing" "Default Gateway", you can see the Default Gateway
screen. Deselect the checkbox before Auto Gateway, and then you will be able to select a WAN
Interface from the drop-down list as the system default gateway. The Auto Gateway checkbox is
selected by default.
Figure 4-52
54