TP-Link TD-W8960N User Manual page 59

TD-W8960N
Enable: Check this box to enable the Traffic Control function.
Egress Total Rate (Kbps): Enter the upload speed through the WAN port.
Ingress Total Rate (Kbps): Enter the download speed through the WAN port.
Line Rate-Upstream (Kbps): This field displays the upload speed assigned by your ISP.
Line Rate-Downstream (Kbps): This field displays the download speed assigned by your
ISP.
Save/Apply: Click this button to make the configuration take effect.
Note:
1) The Egress Total Rate and Ingress Total Rate are required to be configured. Otherwise TC
rules cannot be added.
2) Only when the Router is configured to work in DSL connection does the Line Rate field
display the upload/download speed assigned by your ISP. Otherwise there will be empty.
4.4.9.1 Traffic Control Rule
Choose "Advanced Setup" "Traffic Control"
screen as shown in Figure 4-48. This page allows you to view and configure TC rules.
To add a TC rule, click the Add button and you can configure it in the screen as shown in Figure
4-49.
300Mbps Wireless N ADSL2+ Modem Router User Guide
"Traffic Control Rule" and then you will see the
Figure 4-48
52