TP-Link TD-W8960N User Manual page 20

TD-W8960N
values assigned by your ISP. Here we select PPPoE WAN Link Type for example, enter the
Username and Password given by your ISP, and then click Next.
Note:
The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.
4. On the Wireless Configurations screen, we use the default SSID, select Network
Authentication (take Mixed WPA2/WPA-PSK Personal for example), set a Pre-Shared Key,
and then click Save to continue.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-10
13