TP-Link TD-W8960N User Manual page 48

TD-W8960N
The Outgoing IP Filtering feature allows you to control some IP traffic from LAN to access to some
specifically addresses. By default, all outgoing IP traffic from LAN is allowed, but some IP traffic
can be BLOCKED by setting up filters.
Set up an Outgoing IP Filtering rule:
1. Click the Add button in Figure 4-31, and you will see the next screen as shown in Figure 4-32.
2. Enter the Filter name for the rule, it is exclusive and must be filled.
3. Select the protocol: TCP/UDP, TCP, UDP or ICMP in the drop-down list for the connection
between the Source IP address and Destination IP address.
4. Enter a Source IP Address in dotted-decimal notation format and then type the Source
Subnet Mask and Source Port (port or port: port) in the text boxes separately.
5. Enter a Destination IP Address in dotted-decimal notation format and then type the
Destination Subnet Mask and Destination Port (port or port: port) in the text boxes
separately.
6. Click Save/Apply to save this entry.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-31
Figure 4-32
41